ThermOmegaTech® 254-001000-195 HST In-Line High Sample Temperature Valve, 1/2 in Nominal, NPT End Style, 3000 psig Pressure, 300 Series Stainless Steel Body, Domestic
CBPN:258272
MPN:254-001000-195
DESCRIPTION
ThermOmegaTech® High Sample Temperature Valve, In-Line, Series: HST, 1/2 in Nominal, NPT End Style, 3000 psig Pressure, 300 deg F, Media: Air, Fuel, Gas, Oil, Petroleum-Based Hydraulic Oils, Thermal Insulator Handle Actuator, 3.4 in Inlet to Outlet Length, 300 Series Stainless Steel Body, 300 Series Stainless Steel Trim, FKM/PTFE Softgoods, 1.38 in Dia Dimensions, Domestic, Model 1/2 HST-195-SS-V
The High Sample Temperature (HST) thermal shut-off valve protects expensive and delicate sample analyzers from over-temperature damage in the event of a sample cooler failure. This thermostatic valve is used as a fail-safe to automatically and continuously sense the sample temperature after the sample cooler in steam and water analysis systems and other sampling systems. Under normal conditions, the valve is wide open, so the sample fluid passes through the valve. In the event of a loss of cooling fluid to the sample cooler or if the desired sample temperature is exceeded for any reason, the self-operating HST valve will close to prevent damage to the instrumentation downstream. Once the fluid cools back below the set point, the valve will automatically reset open again and resume flow.
ThermOmegaTech 1/2" HST-195-SS-V Instrmnt Sys Integr Valve, Open 195°F (90.6°C) Close 205°F (96.1°C)
ThermOmegaTech® 254-001000-195 HST In-Line High Sample Temperature Valve, 1/2 in Nominal, NPT End Style, 3000 psig Pressure, 300 Series Stainless Steel Body, Domestic
CBPN:258272
MPN:254-001000-195
DESCRIPTION
ThermOmegaTech® High Sample Temperature Valve, In-Line, Series: HST, 1/2 in Nominal, NPT End Style, 3000 psig Pressure, 300 deg F, Media: Air, Fuel, Gas, Oil, Petroleum-Based Hydraulic Oils, Thermal Insulator Handle Actuator, 3.4 in Inlet to Outlet Length, 300 Series Stainless Steel Body, 300 Series Stainless Steel Trim, FKM/PTFE Softgoods, 1.38 in Dia Dimensions, Domestic, Model 1/2 HST-195-SS-V
The High Sample Temperature (HST) thermal shut-off valve protects expensive and delicate sample analyzers from over-temperature damage in the event of a sample cooler failure. This thermostatic valve is used as a fail-safe to automatically and continuously sense the sample temperature after the sample cooler in steam and water analysis systems and other sampling systems. Under normal conditions, the valve is wide open, so the sample fluid passes through the valve. In the event of a loss of cooling fluid to the sample cooler or if the desired sample temperature is exceeded for any reason, the self-operating HST valve will close to prevent damage to the instrumentation downstream. Once the fluid cools back below the set point, the valve will automatically reset open again and resume flow.
ThermOmegaTech 1/2" HST-195-SS-V Instrmnt Sys Integr Valve, Open 195°F (90.6°C) Close 205°F (96.1°C)
Specifications
Item Features
- Self-operating, no power or signal required
- Protects expensive and delicate sample analyzers
- Automatically controls flow based on fluid temperature
- Exclusive Thermoloid® thermal actuator
- Corrosion-resistant - all stainless steel construction
- Operating temperatures unaffected by variable inlet pressures
- 300 stainless steel operating spring
- FKM body seal, PTFE seat seal
- 195 deg F open/205 deg F close temperature
