Spirax Sarco 67496, FT450 Float and Thermostatic Steam Trap, 4 in, ANSI 150 Flange, 750 deg F, 450 psi, Cast Steel
CBPN:81022
MPN:67496
DESCRIPTION
Spirax Sarco Float and Thermostatic Steam Trap, 4 in Nominal, ANSI 150 Flange, 450 psi, Cast Steel, 750 deg F
The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature, while non-condensable gases are released by a separate internal balanced pressure thermostatic air vent.
Spirax Sarco FT450 Steam Traps are convenient to maintain as they can be serviced without disrupting piping connections. Nonetheless, prior to any maintenance, it's crucial to fully isolate the trap from both the supply and return lines. Periodic disassembly of the trap is necessary for thorough inspection and cleaning of its valve head, seat, operating mechanism, and air vent. Any worn or damaged components should be replaced using an air vent assembly or complete valve mechanism assembly. The Spirax FT450 spare parts include a Float Kit, set of 3 Gaskets, Valve Mechanism Kit, and Air Vent Assembly.
Spirax Sarco 67496, FT450 Float and Thermostatic Steam Trap, 4 in, ANSI 150 Flange, 750 deg F, 450 psi, Cast Steel
CBPN:81022
MPN:67496
DESCRIPTION
Spirax Sarco Float and Thermostatic Steam Trap, 4 in Nominal, ANSI 150 Flange, 450 psi, Cast Steel, 750 deg F
The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature, while non-condensable gases are released by a separate internal balanced pressure thermostatic air vent.
Spirax Sarco FT450 Steam Traps are convenient to maintain as they can be serviced without disrupting piping connections. Nonetheless, prior to any maintenance, it's crucial to fully isolate the trap from both the supply and return lines. Periodic disassembly of the trap is necessary for thorough inspection and cleaning of its valve head, seat, operating mechanism, and air vent. Any worn or damaged components should be replaced using an air vent assembly or complete valve mechanism assembly. The Spirax FT450 spare parts include a Float Kit, set of 3 Gaskets, Valve Mechanism Kit, and Air Vent Assembly.
Specifications
Item Features
- Stainless Steel Internals
- Maximum allowable pressure: 535 psig at 650 deg F and 505 psig at 750 deg F
- Maximum allowable temperature: 750 deg F at 0 to 505 psig
- In-line horizontal piping configuration
