Cooney Brothers
Home
Home

Products

Products

GRUVLOK  FIG 7800 Swing Check Valve

Gruvlok® 2200750087 Fig 7800 Swing Check Valve, 5 in Nominal, Grooved End Style, Ductile Iron Body, Domestic

CBPN:164406

UPC:690291337659

MPN:2200750087

Price:
$1424.16 / EA

DESCRIPTION

Gruvlok® Swing Check Valve, Series: Fig 7800, 5 in Nominal, Grooved End Style, 300 psi Pressure, No Low Lead Compliance, Media: Alkaline/Dilute Acids/Oil-Free Air/Water, 9-3/4 in Inlet to Outlet Length, 4-5/8 in Top to Inlet Center, Ductile Iron Body, 302 Stainless Steel Trim, Rust Inhibiting Painted, Orange Enamel, 5.563 in OD, Domestic

The Gruvlok® Series 7800 Check Valve is a compact, cost effective valve offering low pressure-drop, non-slam performance. The Series 7800 Check Valve assembly is lighter and faster to install, and costs less than flanged and wafer valve assemblies. In the fully open position the Series 7800 swing clapper is held tightly against the valve body, out of the flow stream, to provide maximum flow area and prevention of clapper flutter. The clapper design produces quick, non-slam closure before flow reversal can occur, while meeting FM requirements for an anti-water hammer valve rating. Each valve is hydrostatically tested for leak tightness to 500 PSI. The clapper-seat design permits leak free sealing of back pressures in service conditions ranging from 300 PSI (20.7 bar) to as low as 1 PSI (0.07 bar) (head pressure: 28 in).

Gruvlok® 2200750087 Fig 7800 Swing Check Valve, 5 in Nominal, Grooved End Style, Ductile Iron Body, Domestic

CBPN:164406

MPN:2200750087

UPC:690291337659

Price:
$1424.16 / EA
 
Gruvlok Logo

DESCRIPTION

Gruvlok® Swing Check Valve, Series: Fig 7800, 5 in Nominal, Grooved End Style, 300 psi Pressure, No Low Lead Compliance, Media: Alkaline/Dilute Acids/Oil-Free Air/Water, 9-3/4 in Inlet to Outlet Length, 4-5/8 in Top to Inlet Center, Ductile Iron Body, 302 Stainless Steel Trim, Rust Inhibiting Painted, Orange Enamel, 5.563 in OD, Domestic

The Gruvlok® Series 7800 Check Valve is a compact, cost effective valve offering low pressure-drop, non-slam performance. The Series 7800 Check Valve assembly is lighter and faster to install, and costs less than flanged and wafer valve assemblies. In the fully open position the Series 7800 swing clapper is held tightly against the valve body, out of the flow stream, to provide maximum flow area and prevention of clapper flutter. The clapper design produces quick, non-slam closure before flow reversal can occur, while meeting FM requirements for an anti-water hammer valve rating. Each valve is hydrostatically tested for leak tightness to 500 PSI. The clapper-seat design permits leak free sealing of back pressures in service conditions ranging from 300 PSI (20.7 bar) to as low as 1 PSI (0.07 bar) (head pressure: 28 in).

Specifications

BrandGruvlok®
Weight19 lbs
Nominal Size5 in
End StyleGrooved
Low Lead ComplianceNo
Body MaterialDuctile Iron
ColorOrange Enamel
Dimensions5.563 in OD
FinishRust Inhibiting Painted
Inlet to Outlet Length9-3/4 in
Manufacturer NameASC Engineered Solutions
MediaAlkaline/Dilute Acids/Oil-Free Air/Water
Pressure Rating300 psi
SeriesFig 7800
Top to Inlet Center4-5/8 in
Trim Material302 Stainless Steel
ApplicationFor grooved end pipes
Domestic/ImportDomestic
Country of OriginUS
Standards and ApprovalsASTM A536 | ASTM A313 Spring | cULus Listed | FM Approved

Item Features

  • In the fully open position the Series 7800 swing clapper is held tightly against the valve body, out of the flow stream, to provide maximum flow area and prevention of clapper flutter. 
  • Standard EPDM clapper facing
  • 302 stainless steel spring