
Gruvlok® 0387002405 FIG 70G Butterfly Valve, 2 in Nominal, Grooved End Style, Carbon Steel Body, EPDM Softgoods, Domestic
CBPN:291677
UPC:662428013675
MPN:0387002405
DESCRIPTION
Gruvlok® Butterfly Valve, Series: FIG 70G, 2 in Nominal, Grooved, -40 to 230 deg F, 2-Position Lockable Handle Actuator, 3.19 in Inlet to Outlet Length, 2.37 in Top to Inlet Center, Carbon Steel Body, 316 Stainless Steel Disc, 416 Stainless Steel (Stem) Stem & Pin Material, Grade-E , Painted
The FIG 70G Butterfly Valve is designed for use with Anvil® Gruvlok® couplings for fast and easy installation on grooved pipe. The valve body is fully rubber lined in EPDM or Nitrile material. A 316 Stainless Steel Disc is standard. The valve is supplied with a 2-position lockable handle. Grooved ends conform to the requirements of AWWA C606. Not intended for use in potable water systems.
Gruvlok® 0387002405 FIG 70G Butterfly Valve, 2 in Nominal, Grooved End Style, Carbon Steel Body, EPDM Softgoods, Domestic
CBPN:291677
MPN:0387002405
UPC:662428013675
DESCRIPTION
Gruvlok® Butterfly Valve, Series: FIG 70G, 2 in Nominal, Grooved, -40 to 230 deg F, 2-Position Lockable Handle Actuator, 3.19 in Inlet to Outlet Length, 2.37 in Top to Inlet Center, Carbon Steel Body, 316 Stainless Steel Disc, 416 Stainless Steel (Stem) Stem & Pin Material, Grade-E , Painted
The FIG 70G Butterfly Valve is designed for use with Anvil® Gruvlok® couplings for fast and easy installation on grooved pipe. The valve body is fully rubber lined in EPDM or Nitrile material. A 316 Stainless Steel Disc is standard. The valve is supplied with a 2-position lockable handle. Grooved ends conform to the requirements of AWWA C606. Not intended for use in potable water systems.
Specifications
Item Features
- The Fig. 70G Butterfly Valve is designed for use with Anvil Gruvlok couplings for fast and easy installation on grooved pipe.
- The valve must not be installed with the disc in the fully open position
- The disc must be partially closed so that no part is protruding past the end of the valve body during installation
- Grade-E EPDM lining O-ring