CRANE® L171XU-2-1/2 Globe Valve, 2-1/2 in Nominal, Flanged End Style, 600 lb, Cast Steel Body, Handwheel Actuator
CBPN:238513
MPN:L171XU-2-1/2
DESCRIPTION
CRANE® Globe Valve, Series: 171, 2-1/2 in Nominal, Flanged End Style, 1480 psi Pressure, 600 lb Pressure Class, -20 to 100 deg F, Handwheel Actuator, 13 in Inlet to Outlet Length, 21 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing Softgoods, 10 in Diameter Hand Wheel
CRANE® cast steel globe valves are highly efficient for services requiring frequent operation and throttling when pressure drop across the valve is about 20% of inlet pressure. Closer throttling, creating higher pressure drops may cause cavitation or excessive velocities which could cause high noise levels, vibration and possible damage to the valve or adjacent piping. Globe valves can be equipped with optional operators and are available with a variety of trims to match service requirements. CRANE globe valves are supplied as standard with contour or spherical type plugs and are classified as quick opening on flow curves.
CRANE® L171XU-2-1/2 Globe Valve, 2-1/2 in Nominal, Flanged End Style, 600 lb, Cast Steel Body, Handwheel Actuator
CBPN:238513
MPN:L171XU-2-1/2
DESCRIPTION
CRANE® Globe Valve, Series: 171, 2-1/2 in Nominal, Flanged End Style, 1480 psi Pressure, 600 lb Pressure Class, -20 to 100 deg F, Handwheel Actuator, 13 in Inlet to Outlet Length, 21 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing Softgoods, 10 in Diameter Hand Wheel
CRANE® cast steel globe valves are highly efficient for services requiring frequent operation and throttling when pressure drop across the valve is about 20% of inlet pressure. Closer throttling, creating higher pressure drops may cause cavitation or excessive velocities which could cause high noise levels, vibration and possible damage to the valve or adjacent piping. Globe valves can be equipped with optional operators and are available with a variety of trims to match service requirements. CRANE globe valves are supplied as standard with contour or spherical type plugs and are classified as quick opening on flow curves.
Specifications
Item Features
- Extra strong schedule
- Carbon steel grade WCB bonnets/gland flange/handwheel, hardfaced seat ring, 13% Cr overlay disc, ring type joint bonnets gasket, 410 stainless steel back seat/disc stem nut/gland, carbon steel disc washer
- Steel eye bolt, ASTM A563 grade a or O eye bolt nuts, ASTM A193 grade B7 bonnets studs, ASTM A194 grade 2H bonnets nuts/handwheel nut, stainless steel ID tags, steel ID pins
- Seat ring is seal welded to eliminate leak path
- Compensates for deformation of body due to pipe stresses
- Will not stick when valve is closed hot and allowed to cool
- Outside screw and yoke, bolted bonnets
- Full range of special trims and option available
- Standard construction: wcb-trim 8, other option are available
- Crane recommends the use of manual or powered gear assistance for size 6 in and larger
- 1480 psi at -20 deg F to 100 deg F
- 13 Cr ASTM A217 (CA15) seating surface
