Bonomi 8P0027-1-1/2 2-Way 2-Piece Pneumatic Actuated Ball Valve, Spring Return, 1-1/2 in, FNPT, 316 Stainless Steel Body, Full Port, PTFE Softgoods, Import
CBPN:228369
MPN:8P0027-1-1/2
DESCRIPTION
Bonomi North America Ball Valve Package, 2-Way 2-Piece, Series: 700LL, 1-1/2 in Nominal, FNPT, 1000 psi/150 psi Steam, -20 to 450 deg F, Full Port, Media: Steam, 1.49 in Orifice, Pneumatic Spring Return Actuator, 316 Stainless Steel Ball, 4.33 in Inlet to Outlet Length, 9.1 in Top to Inlet Center, 316 Stainless Steel Body, 316 Stainless Steel/RPTFE/Vinyl Trim, PTFE, 9.47 in L x 4.17 in W x 10.6 in H, Import
The 8P0027 series features an ASTM A351-CF8M stainless steel, full port, 2000 psi 1/4 to 1 in, 1500 psi 1-1/4 to 2 in, with two-point mounting pad. The valve is also built to meet NACE MR-0175, and has ANSI B1.20.1 thread depths. A thermal relief hole in the ball stem slot is standard. The Valbia pneumatic actuator comes with a hard-anodized aluminum body, and powder coated end caps. In addition, all Valbia pneumatic actuators are standardly furnished with elevated temperature seals to 302 deg F. The patented side loaded limit stops never enter the piston chamber eliminating extra possible leak paths.
Bonomi 8P0027-1-1/2 2-Way 2-Piece Pneumatic Actuated Ball Valve, Spring Return, 1-1/2 in, FNPT, 316 Stainless Steel Body, Full Port, PTFE Softgoods, Import
CBPN:228369
MPN:8P0027-1-1/2
DESCRIPTION
Bonomi North America Ball Valve Package, 2-Way 2-Piece, Series: 700LL, 1-1/2 in Nominal, FNPT, 1000 psi/150 psi Steam, -20 to 450 deg F, Full Port, Media: Steam, 1.49 in Orifice, Pneumatic Spring Return Actuator, 316 Stainless Steel Ball, 4.33 in Inlet to Outlet Length, 9.1 in Top to Inlet Center, 316 Stainless Steel Body, 316 Stainless Steel/RPTFE/Vinyl Trim, PTFE, 9.47 in L x 4.17 in W x 10.6 in H, Import
The 8P0027 series features an ASTM A351-CF8M stainless steel, full port, 2000 psi 1/4 to 1 in, 1500 psi 1-1/4 to 2 in, with two-point mounting pad. The valve is also built to meet NACE MR-0175, and has ANSI B1.20.1 thread depths. A thermal relief hole in the ball stem slot is standard. The Valbia pneumatic actuator comes with a hard-anodized aluminum body, and powder coated end caps. In addition, all Valbia pneumatic actuators are standardly furnished with elevated temperature seals to 302 deg F. The patented side loaded limit stops never enter the piston chamber eliminating extra possible leak paths.
Specifications
Item Features
- Self adjusting stem packing
- Blow out proof stem design
- 100% air tested under water at 80 psi
- Mounting pad for actuator
- Thermal relief hole in stem slot
- Vinyl handle sleeve
- RPTFE seats
- 316 stainless steel stem
- PTFE join gasket/thrust washer/stem washer/V-ring packing
